HVAC Sheet Metal Block 2 Practice Exam

These questions are part of the practice quiz. Start practicing

• What does a breakaway connection do?
• Which three items are typically included in a grille callout?
• When connecting multiple vents, which should be at the bottom?
• Where should hook seams be caulked unless the slope is 1/25?
• The oval shape of BW vent is designed to be installed in what type of walls?
• What is a crucial step when reviewing new blueprints on a job site?
• When a roof jack, ventilator, or gooseneck is longer than what measurement, you require a curb that is 12 inches in size?
• What type of backing is commonly used behind stucco for easy installation of hoods?
• Which type of vent is designed specifically for gas fireplaces?
• What is the primary purpose of springs in a dynamic fire damper?
• Is there a substance that does not expand when heated and contract when cooled?
• What single word describes the efficiency gained through multi-equipment use?
• What does the acronym MUA stand for in HVAC terminology?
• What is an as-built drawing?
• What is the primary purpose of B vent?
• Where are addendums typically found?
• Which component is essential for ensuring the effective operation of a fire damper?
• A dedicated HRV is used to provide what type of air management?
• What role does cladding play in thermal performance?
• What is the minimum slope required for a roof?
• What type of appliance is typically installed in a bathroom for ventilation?
• What are the two primary types of dormers?
• Which organization dictates the construction and installation of fire protection devices?
• What feature is essential for a rain screen to function effectively?
• What is used to create penetrations in concrete before it is poured?
• In which type of building are proprietary floors commonly found?
• What is a common risk if rainwater is not properly managed by cladding?
• Duct stats typically have a range of which temperatures?
• What is a common function of vent connectors?
• Smoke dampers have blades of the __________ style.
• What are the three types of flashings commonly found on low slope roofs?
• Which type of weather is cladding particularly designed to protect against?
• Flashings will extend how many inches up vertical surfaces and roof decks?
• What function does a fusible link serve in a fire damper?
• What type of appliance generally requires a coaxial vent setup?
• Why is fresh air requirement an important factor for roof-mounted equipment?
• What material is commonly used in the flashing of low slope roofs?
• What happens to a cold vent after it has been off for a while?
• What is one of the main advantages of standalone HVAC units?
• What is the minimum width for flashing in open valleys?
• Fire dampers are critical in preventing the spread of fire through what system in a building?
• Which type of heat can be focused?
• A scupper is a hole through a parapet that must be lined with what material to ensure it is watertight?
• What are the four basic elements of every low slope roof?
• Fire dampers in a duct line must always be installed in a sleeve. True or False?
• How long can a Super A vent handle temperatures of 650 degrees continuously?
• Hinged door dampers are used where a ______ hour fire rating is required.
• How do Category I appliances vent excess gases?
• A steep roof has a slope of what ratio or greater?
• Unequal slope valleys require a valley flashing with an inverted V that is how high?
• Duplex and legal units are separated by a ________.
• In a curtain damper Type C installation, where are the blades and frame positioned?
• Is it permissible for a single wall vent connector to pass through a floor?
• Are roof decks always sloped for drainage?
• What is the primary function of hangers in HVAC systems?
• What is the impact of not having a return air duct for a furnace?
• True or False: Everything for B vent and BW vent is the same except for their shape.
• What is the primary use of a vent in HVAC systems?
• Which of the following are types of radiant heat?
• What is the primary purpose of aluminum cladding on outdoor ductwork?
• Thermally operated dampers are designed to do what if the bimetal fails?
• What are the products of combustion when oxygen reacts with methane?
• What is the maximum height classification of a low rise structure?
• What method can be used to provide heat in integrated Make-Up Air (MUA) systems?
• A flat roof with a parapet must slope toward what feature for proper drainage?
• In residential systems using zones, where should a bypass relief be installed?
• What is the main lightweight roofing material commonly used?
• What is the primary function of the barrier approach in HVAC applications?
• The inside edge of a gutter lining should finish at least how many inches above the outside edge?
• In the context of building design, what does cladding primarily serve as?
• How much heavier gauge is used on sleeves of a fire damper compared to the duct?
• How far should the inside edge of a gutter lining be above the outside edge for proper drainage?
• Why is it important to follow all the steps with a new blueprint at a job site?
• What do flashing protect and which elements do they guard against?
• What is one characteristic of a standalone HVAC unit?
• When water vapor is mixed with CO2, what is created?
• What type of system commonly utilizes the turbulent flow precipitator?
• Which of the following describes a key advantage of using a rain screen?
• A fitting or duct should be named and what as to where it is on site?
• When an intersecting roof is built, what is created at a 45-degree angle to the walls and ridge?
• In a closed valley, how far should shingles from one side run underneath?
• What is the minimum distance required from a vent to a sidewalk?
• In low rise condominiums, what common area is typically shared with all residents?
• What are the two types of ceiling radiation dampers used for?
• What might occur if cladding is improperly installed?
• Do all fire dampers require access to them?
• When is return air ducted to one or several ceiling grills?
• What can be laminated between layers of glass to reduce unwanted heating of the building interior?
• The largest opening through a wall or floor for a fire damper bigger than the minimum is _______.
• What is the maximum temperature for B vent?
• Which terms are most commonly associated with roofing?
• Vent connectors are typically made of what type of material?
• In what unit is an inline electric duct heater measured?
• How is slope achieved in a shed roof design?
• Which type of draft relies solely on atmospheric pressure?
• What is the purpose of HEPA filters in the HVAC industry?
• Which of the following is NOT a duct connection to an HRV?
• What are the four types of mechanical spaces within commercial structures?
• How far from rooftop equipment or fans is acoustic insulation commonly found?
• Who usually approves equipment used in construction projects?
• How does latent heat differ from sensible heat?
• What is the maximum slope allowed for a roof?
• What does Category I consist of?
• What form of latent heat is responsible for changing propane from liquid to gas?
• What materials are used to construct a Super A vent?
• What role does the mechanical contractor usually fulfill on a construction project?
• Who is typically responsible for creating job schedules?
• What is one advantage of multi-equipment systems in HVAC?
• Type BH vent is made of which material?
• What type of metal is typically used for the springs of fire dampers?
• How do you convert Fahrenheit to degrees Celsius?
• What is another name for an up and down duplex?
• What is the main problem associated with cementitious siding?
• Which type of damper is primarily used for ventilation and smoke control in commercial buildings?
• Which of the following best describes a legal suite?
• In a curtain damper Type A installation, where are the blades and frame located?
• Type C curtain dampers are used when velocities are __________.
• Which type of concrete floor resembles a wood residential floor?
• Why is it important to maintain positive pressure in hallways and stairwells?
• What is an advantage of using a rain screen approach in building design?
• When is a curb required for a roof jack or ventilator?
• What is the maximum size of a length of a side of a gumbox?
• Which item callouts are most commonly used in HVAC drawings?
• Fire damper designs are tested by which organization?
• Type B curtain dampers are commonly used when duct height is what measurement or less?
• What is the minimum rise required for venting per foot?
• Which of the following is NOT a type of hanger?
• Where should smoke dampers be installed in relation to the smoke barrier?
• For effective venting, what is an important factor to consider regarding vent location?
• Who is responsible for issuing change orders?
• A 90-degree venting has an equivalent length of what?
• What material is used to secure glass cladding to a building?
• What roofing technique utilizes seven layers for construction?
• What is the main characteristic of cementitious siding that makes it a concern for builders?
• Which of the following is a characteristic of dynamic fire dampers?
• What is the construction of the inner liner of Type B vent made of?
• Low rise structures vary in size from ______ to ______ stories.
• What is considered the most durable roofing material available?
• What is a key characteristic of a firewall in a multifamily structure?
• What is the typical vulnerability of EIFS systems regarding weather?
• Which element is NOT typically included in a low slope roof system?
• What drawing accessory is used to show fabrication shop drawings?
• Which of the following is NOT a characteristic of proper venting?
• Multi-blade dampers are mainly used in situations involving what?
• What are the three criteria for grill selection in multifamily applications?
• What type of installation would typically utilize a single wall vent?
• Where should you obtain equipment specifications for a custom item?
• What is the primary purpose of a smoke damper?
• What architectural style does a gambrel roof, often referred to as a barn roof, provide?
• To ensure compliance with safety standards, fire protection devices must be installed according to what?
• To ensure watertight integrity, a scupper must be lined with what?
• What temperature can a Super A vent handle for a maximum of 3 minutes?
• Zoning in HVAC helps to eliminate:
• What should be avoided in areas using a ceiling space for air return?
• What is the most common HVAC equipment used in multifamily dwellings?
• What are the two types of chimneys?
• What should be done when the duct size is larger than available fire and smoke dampers?
• Which of the following is NOT a function of cladding?
• When is it permissible to modify a fire damper?
• In a curtain damper Type B installation, where are the blades located?
• What essential feature must a flat roof have to ensure effective drainage?
• Which is the primary function of a fresh air inlet in an HRV system?
• How often should fire dampers be inspected?
• What is the role of a chimney in HVAC applications?
• What is the primary method for achieving a gable roof?
• Fire damper blades can either be __________ or __________.
• ULC labs test fire dampers from _____ hour to _____ hour rating.
• What is the biggest difference between commercial and residential blueprints?
• Linings should be constructed of sheets with a maximum length of how many feet?
• What might be a consequence of not having adequate cladding on a building?
• Who should you consult for changes to an HVAC design?
• Where must fire and smoke dampers be installed?
• What is an essential function of the draft hood in Category I appliances?
• What is one approach to keep a commercial building watertight?
• What is the maximum sheet length for lining as specified in the guidelines?
• Up blast fans are primarily used for which application?
• Why is it important for cladding to be weather-resistant?
• What is the recommended slope for the standing seam/batten seam roofing?
• What happens to a fusible link during a fire?
• In which situation is a ceiling space typically used?
• What is considered a downside to EIFS (Exterior Insulation and Finish Systems)?
• Which type of damper is allowed as an aftermarket add-on in residential buildings?
• Which type of venting uses a barometric damper?
• What is the smallest allowable size for a chimney?
• What is the required minimum width for a penetration that necessitates a cricket/saddle?
• Which system contributes to both comfort and efficiency in HVAC?
• What type of filter is commonly used in hospitals for air purification?
• What type of materials are typically used for cladding?
• In which application are round dampers typically used?
• What is another name for gum cups?
• What is a unique benefit of using aluminum extrusions in building facades?
• What is the most commonly used fire damper type?
• Which statement about water vapor and CO2 is correct?
• Is plastic plumbing considered combustible?
• What is a primary characteristic of Category IV appliances regarding efficiency?
• What are the two types of duct insulation typically used?
• Which component is essential for ensuring fire and smoke dampers operate correctly in a fire event?
• Can steel siding be formed into any shapes desired?
• How high must venting extend through a roof?
• What is another important action when dealing with blueprints on site?
• What are the types of drafts used in HVAC systems?
• What is another name for a waffle slab?
• A chimney must extend how much above a roof?
• Which type of damper is designed for high-temperature applications?
• What is the function of a volume control damper?
• Vent connectors connect appliances to which component?
• Multifamily structures are a structure that ________.
• What is the most common size for smoke dampers in commercial applications?
• Smoke dampers can be installed in a continuous duct. True or False?
• How does a rain screen help prevent damage to a building?
• What are the two types of gases produced from combustion?
• Type L vents can handle up to what maximum temperature?
• Which of these choices is essential for coordinating work on a construction site?
• What is a characteristic of a coaxial pipe?
• What is a common ventilation option for indoor swimming pools?
• Ceiling dampers are made to protect from __________ and __________.
• Which material is commonly used on industrial buildings due to its high strength?
• What is the primary purpose of multi-blade dampers in HVAC systems?
• Type B vent is a manufactured round vent used on which type of appliances?
• What are the two types of barometric dampers?
• Single blade dampers are no longer used because they were closed by what means?
• What is the highest temperature that Category IV appliances' flue gas will achieve before its dew point?
• Fire and smoke protection devices are utilized in HVAC systems primarily to maintain what?
• What is the purpose of a rain screen in a building?
• What is a significant feature of the curtain damper designs?
• Category I appliances run with a flue gas loss of no less than what percentage?
• What material lines the interior of Type L vents?
• What kind of appliances can Type L vents be associated with?
• What is the primary characteristic of as-built drawings?
• A damper designed to be installed with blades in the airstream is known as __________.
• Fresh air economizers typically introduce what percentage of fresh air?
• Type A curtain dampers are primarily used when restrictions of the __________ in the airstream is not a concern.
• Type C curtain dampers come in which of the following styles?
• What is necessary for every furnace and fan coil unit?
• Heat pumps are most effective in regions where temperatures rarely drop below what threshold?
• What is another name for stack action in HVAC systems?
• What is the definition of flue gas?
• What is the second approach to maintaining water tightness in a commercial building?
• What elements does cladding primarily protect a building from?
• What ventilation system is commonly used for pools?
• Insulated curtain dampers are generally used in ceiling assemblies that are required to have a fire resistance rating of ___________ hours.
• Which type of damper is generally recommended for lower airflow velocity situations?
• What is the minimum distance between a direct vent and the ground?
• Which type of building configuration typically requires more cooling due to high internal heat and infiltration?
• Sleeves are required to extend a maximum of ________ on both sides of a wall.
• How much must sheathing membrane and wall finish overlap the flashing?
• What is the purpose of using sleeving in construction?
• What tool should be used to cut cementitious siding effectively?
• Are roof decks always sloped for drainage?
• Which component is typically included in the construction of a vent pipe?
• Which factor is a reason for using roof-mounted HVAC equipment?
• Will a draft control device allow spillage when there is a stoppage in the vent?
• What are the three essential conditions for combustion to occur?
• What is a key consideration when drilling into concrete?
• What is the correct use of double acting barometric dampers?
• Why do you install balancing dampers in specified locations?
• What is a common characteristic of a two-way joist system?
• What is the minimum fixed opening required when an automatic damper is installed on an appliance with a standing pilot?
• Which type of hanger is often used for horizontal runs of ductwork?
• What is the only type of venting allowed for wood burning fireplaces?
• What benefit does zoning provide to the occupant in HVAC systems?
• The most common low rise structures are _________ stories and known as _________.
• What is a key consideration when installing fire dampers?
• According to NFPA, what is the requirement for fire rating between units in R-2000 duplexes?
• Which type of draft is associated with fan assistance?
• Where do gridlines normally intersect on a blueprint?
• What are vent gases?
• Grill balancing is performed to meet whose standards?
• What is the typical type of flashing used on horizontal surfaces?
• What are the four types of venting typically used?
• Which type of filter was developed in Canada for air cleaning?
• A cricket/saddle is desired when a penetration is at least how wide?
• What type of hanger is specifically designed for use during seismic activity?
• A ceiling space can serve as return air if there are no what present in it?